Catalogue
All parts
Can't name the part? Send photos with a quote request— we'll match it.
Internal Wall Sheet — Vinyl-Faced Ply 2440×1220
Standard pre-finished vinyl-faced plywood wall sheet used across most portable building fit-outs. Pairs with PVC cover strips and corner trims.
Ceiling Sheet — Pre-Finished 2440×1220
Lightweight pre-finished ceiling sheet for portable and transportable buildings.
Wet Area Wall Sheet — 2440×1220
Moisture-resistant lining sheet for ablutions and wet areas. Supply only — waterproofing by licensed trades.
Cover Strip / Honey Batten — PVC 3660mm
The classic portable building joint cover. Snap-fit PVC strip covering wall sheet joins.
Internal Corner Trim — PVC 3660mm
Internal 90° corner trim matched to vinyl-faced wall sheets.
External Corner Trim — PVC 3660mm
External corner protection trim for lined walls.
Skirting Trim — PVC 3660mm
Floor-line skirting trim for portable building interiors.
Joining H-Mould — PVC 3660mm
H-section joiner for butting wall sheets without a batten look.
Door Jamb Trim Set
Jamb trim set for standard portable building door openings.
Barge Capping — Colorbond 3000mm
Roof-edge barge capping folded for transportable building profiles. Standard colours.
External Corner Capping — 3000mm
Folded external corner capping for clad transportable walls.
Window Flashing Kit
Head, sill and side flashings plus seals for a standard portable window replacement.
Portable Building Door — Fully Framed 2040×820
Fully-framed external door built for portable buildings — handles transport movement, weather sealing and repeated relocation. Hinged L/H or R/H.
Sliding Window — 900×600 with Flyscreen
Aluminium sliding window sized for common portable building openings. Flyscreen included.
Heavy-Duty Lever Entrance Lockset
Commercial-grade keyed lever set suited to site offices and hire fleet doors.
Surface-Mount Door Closer
Adjustable surface-mounted closer for portable building doors.
Kitchenette Pack — 1200mm
1200mm base cabinet, sink, tap and splashback — scoped for crib rooms and site offices. Plumbing/electrical connection by licensed trades.
6×3 Office Refurb Kit
Everything to re-line a 6m × 3m portable office: wall sheets, ceiling sheets, cover strips, corners, skirting, adhesive, sealant and fixings — counted for you. One quote instead of chasing five suppliers, matching trims and sheets, less wasted material.
Door Replacement Pack
Framed door, jamb trims, lockset, closer and seals in one pack — matched to your wall thickness.
Panel Adhesive — Box of 12
High-grab construction adhesive matched to vinyl-faced wall sheet installs. One box lines roughly a 6×3 interior.
Sealant Pack — Wet Area & Exterior
Mixed pack of neutral-cure silicone for wet areas, joints and external penetrations.
Wall Sheet Fixing Pack
Screws and pins counted for a standard re-line — no third trip to the hardware store.
Door & Window Weather Seal — 10m Roll
EPDM weather seal for doors and windows on transportable buildings.
Internal Screws — Grey Head, Box
The grey-head screws used on internal wall sheets and trims in portable buildings — the hire-fleet standard reorder item.
External Door Striker Plate
Replacement striker plate for portable building external doors. Two types exist (standard and solar-toilet doors) — tell us which door or send a photo.
Door Catcher / Rubber Stopper — Toilet Stall
The little rubber stopper that catches toilet stall doors in ablution buildings — the part everyone describes differently. Send a photo if unsure.
Indicator Bolt — Vacant/Engaged, Toilet Stall
Vacant/engaged indicator bolt for toilet stall doors in ablution and washroom buildings.
Toilet Roll Holder — Box of 10
Commercial toilet roll holders boxed in tens for ablution block fit-outs and hire fleet turnarounds.
Wall Vent — 200×200
Louvred wall vent for condensation management in lined portable buildings.
Can't find the part?
We source to spec — send photos and measurements and we'll match it.